Formulation of a Biodegradable Detergent for Cleaning Oily Residues Generated during Industrial Processes

The use of toxic petroleum-based heavy oils is common in industrial processes. The cleaning of machines, equipment, and other surface covered in these oils is achieved with expensive products that are often also toxic and harmful to both the health of workers and the environment. The present paper proposes the development of a sustainable biodetergent made from plant-based materials. Tests were performed to determine the properties of the biodetergent in terms of its surfactant and emulsifying capacities, stability, toxicity, and the removal of heavy oil from glass plates and metallic surfaces. The formulation was composed of a natural solvent (cottonseed oil), a plant-based surfactant agent (saponin), and two natural stabilizers (carboxymethylcellulose and glycerine). The formulation was stable, nontoxic, and highly efficient, removing 100% of the heavy oil from glass and metallic surfaces. This solution developed in this study could be used in diverse industries with the need to clean machines and parts encrusted with oil and grease as well as the cleaning of floors covered with petroleum-based residues. A preliminary analysis of the economic feasibility of using the detergent was carried out at a Brazilian power plant. Besides the reduction in environmental impact due to the use of a nontoxic, biodegradable product as well as the reduction in health risks to workers associated with toxic cleaning products, this new product can have a considerable impact on the market as an environmentally friendly solution.     

Tumor Necrosis Factor α and Interleukin-1β Acutely Inhibit AgRP Neurons in the Arcuate Nucleus of the Hypothalamus

Obesity-associated low-grade inflammation favors weight gain, whereas systemic infection frequently leads to anorexia. Thus, inflammatory signals can either induce positive or negative energy balance. In this study, we used whole-cell patch-clamp to investigate the acute effects of three important proinflammatory cytokines, tumor necrosis factor α (TNF-α), interleukin-6, and interleukin-1β (IL-1β) on the membrane excitability of agouti-related peptide (AgRP)- or proopiomelanocortin (POMC)-producing neurons. We found that both TNF-α and IL-1β acutely inhibited the activity of 35–42% of AgRP-producing neurons, whereas very few POMC neurons were depolarized by TNF-α. Interleukin-6 induced no acute changes in the activity of AgRP or POMC neurons. Our findings indicate that the effect of TNF-α and IL-1β, especially on the activity of AgRP-producing neurons, may contribute to inflammation-induced anorexia observed during acute inflammatory conditions.     

Ligand-Installed Nanocarriers toward Precision Therapy

Development of drug-delivery systems that selectively target neoplastic cells has been a major goal of nanomedicine. One major strategy for achieving this milestone is to install ligands on the surface of nanocarriers to enhance delivery to target tissues, as well as to enhance internalization of nanocarriers by target cells, which improves accuracy, efficacy, and ultimately enhances patient outcomes. Herein, recent advances regarding the development of ligand-installed nanocarriers are introduced and the effect of their design on biological performance is discussed. Besides academic achievements, progress on ligand-installed nanocarriers in clinical trials is presented, along with the challenges faced by these formulations. Lastly, the future perspectives of ligand-installed nanocarriers are discussed, with particular emphasis on their potential for emerging precision therapies.     

Spray-dried solid dispersions containing ferulic acid: comparative analysis of three carriers,in vitro dissolution,antioxidant potential and in vivo anti-platelet effect

This article aimed to improve the relative solubility and dissolution rate of ferulic acid (FA) by the use of spray-dried solid dispersions (SDs) in order to ensure its in vitro antioxidant potential and to enhance its in vivo anti-platelet effect. These SDs were prepared by spray-drying at 10 and 20% of drug concentration using polyvinylpyrrolidone K30 (PVP-K30), polyethylene glycol 6000 (PEG 6000) and poloxamer-188 (PLX-188) as carriers. SDs and physical mixtures (PM) were characterized by SEM, XRPD, FTIR spectroscopy and TGA analysis. Spray-dried SDs containing FA were successfully obtained. Relative solubility of FA was improved with increasing carrier concentration. PVP-K30 and PEG 6000 formulations showed suitable drug content values close to 100%, whereas PLX-188 presented mean values between 70 and 90%. Agglomerates were observed depending on the carrier used. XRPD patterns and thermograms indicated that spray-drying led to drug amorphization and provided appropriate thermal stability, respectively. FTIR spectra demonstrated no remarkable interaction between carrier and drug for PEG 6000 and PLX-188 SDs. PVP-K30 formulations had changes in FTIR spectra, which denoted intermolecular O–H???O?=?C bonds. Spray-dried SDs played an important role in enhancing dissolution rate of FA when compared to pure drug. The free radical-scavenging assay confirmed that the antioxidant activity of PEG 6000 10% SDs was kept. This formulation also provided a statistically increased in vivo anti-platelet effect compared to pure drug. In summary, these formulations enhanced relative solubility and dissolution rate of FA and chosen formulation demonstrated suitable in vitro antioxidant activity and improved in vivo anti-platelet effect.     

Ozonated Mineral Oil: Preparation,Characterization and Evaluation of the Microbicidal Activity

The ozonation of vegetable oils has been studied, since the produced ointments have antibacterial and fungicidal activities. However, the ozonation of mineral oils has not been reported in the literature yet, opening an interesting field for examination. In this work, we have shown the ozonation of a commercial mineral oil (Nujol). The main goal was to produce oils containing free ozone, so that this gas could act as antimicrobial agent. It was found that in Nujol, ozone remains for at least 40 days and in the sample ozonized for 15 h its concentration was 7.5 mg mL^?1. Neat Nujol showed no antimicrobial activity against the tested microorganisms, however, when ozonated it showed antimicrobial activity against Enterococcus faecalis, Staphylococcus aureus and Escherichia coli.     

On the influence of the shear deformation and boundary conditions on the transverse vibration of multi-walled carbon nanotubes

The vibrational properties of multi-walled carbon nanotubes (MWCNTs) are studied, especially the influence of the shear deformation and the boundary conditions on the non-coaxial frequencies. A high order continuum beam model is proposed, which can be applied to study the transverse vibrations of MWCNTs, including those that could have initial deformations due to defects or external actions. Using the model it was found that the non-coaxial intertube frequencies are independent of the shear deformation and the boundary conditions. This result is important considering that the concentric structure of MWCNTs is a crucial geometrical characteristic and a non-coaxial vibration would affect their electronic and optical properties.     

Synthesis and Characterization of Allyl Fatty Acid Derivatives as Reactive Coalescing Agents for Latexes

This work evaluated the use of allyl fatty acid esters derived from vegetable oil (palmitic acid, soybean and sunflower oils) as reactive coalescing agents in a waterborne latex system. Allyl fatty acid derivatives (AFAD) from vegetable oils were synthesized by two different processes. The synthesis was monitored by IR-spectroscopy and the final product characterized by FT-IR, GC–MS, ¹H and ¹³C NMR. The presence of conjugated double bonds in the aliphatic chain was confirmed, which is a determinant for the proposed autoxidative latexes drying mechanism. Each of the AFAD were subsequently added to a standard acrylic emulsion, in order to study its potential as reactive coalescing agent. The minimum film-forming temperature (MFT), glass transition temperature (T _g), drying time and rubbing resistance to solvents were evaluated. The results showed that, when added to water-borne acrylic resins, an AFAD acts as a non-volatile plasticizer capable of autoxidative crosslinking with itself.     

Energy storage and control optimization for an electric vehicle

Two big issues involving electric vehicles are energy supply and power management control. To deal with the energy supply problem, this paper proposes the application of a hybrid energy source system, composed of battery pack and ultracapacitor bank. The power management control between the energy supplies was defined by a fuzzy logic with inference rules optimized through genetic algorithm. The genetic algorithm optimizes lower and upper limits of membership functions aiming to reduce the hybrid energy source system total mass while maximizing the electric vehicle drive range and performance. Through the Pareto frontier, we found the best trade‐off solution.     

Optimization of Lithium Extraction from Lepidolite by Roasting Using Sodium and Calcium Sulfates

The lithium extraction from a lepidolite concentrate using roasting, followed by water leaching, was studied. Several alternative additives were initially tested. The use of sodium and calcium sulfates as additives was evaluated in more detail. The influence of some process variables, namely the roasting time, roasting temperature and the additive/concentrate mass ratio, was studied applying a design of experiments. The lithium extraction was modelled and the fitted and validated model was used to optimize the process response. The increase in the additive/concentrate mass ratio, roasting time and temperature seems to result in solid state reactions and transformations that lead to phase, morphological and particle size distribution modifications, which were assessed by XRPD, SEM, and particle size analyses. In this process, lithium sodium sulfate formation constitutes a crucial step enabling the Li water leaching. High lithium extractions were estimated for several combinations of factors. At 850°C, lithium extractions over 90% are obtained when the roasting time is above 1.90 hour and the additive/concentrate mass ratios are over 0.77. An increase in the temperature to 875°C also leads to lithium extractions over 90% for a roasting time of 1 hour and an additive/concentrate mass ratio of 0.60.